Remote Control Commands
R&S
®
SMC100A
315
Operating Manual 1411.4060.32 ─ 04
Improper use may destroy the assembly!
The respective hardware assembly responds directly to the
:TEST:DIRect
command;
any safety mechanisms are bypassed. The command is used for servicing purposes and
should not be applied by the user.
:TEST<hw>:ALL:STARt
This command performs a selftest on all installed hardware options. The selftest result
is queried with the command
Example:
TEST:ALL:STAR
Starts the selftest
Usage:
Event
:TEST<hw>:ALL:RESult?
Queries the result of the performed selftest (command
Return values:
<All>
0 | 1
Example:
TEST:ALL
Starts the selftest
:TEST:ALL:RES?
Response: "0" on success, "1" on fail
Usage:
Query only
:TEST<hw>:DIRect
<HW_assembly>,<subadress>,<hex data string>
:TEST<hw>:DIRect?
<HW_assembly>,<subadress>
The respective hardware assembly responds directly to the command; any safety mech-
anisms are bypassed. This function is only available via remote control.
Example:
TEST:DIR 'SSYN',0,#H12345678
TEST:DIR? 'SSYN',0
Response:
#H12345678
TEST Subsystem
