Remote-Control Commands
R&S
®
SMCVB-K168
59
User Manual 1179.1064.02 ─ 03
5.1
General Commands
..................................................................................59
...................................................................................... 59
[:SOURce<hw>]:BB:DVBS2:SETTing:CATalog
....................................................................59
[:SOURce<hw>]:BB:DVBS2:SETTing:DELete
..................................................................... 59
[:SOURce<hw>]:BB:DVBS2:SETTing:LOAD
....................................................................... 60
[:SOURce<hw>]:BB:DVBS2:SETTing:STORe
..................................................................... 60
....................................................................................... 60
.................................................................................. 60
[:SOURce<hw>]:BB:DVBS2:PRESet
Sets the parameters of the digital standard to their default values (
*RST
values speci-
fied for the commands).
Not affected is the state set with the command
SOURce<hw>:BB:DVBS2:STATe
.
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:DVS2:STATe
<State>
Activates the standard and deactivates all the other digital standards and digital modu-
lation modes in the same path.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
0
Manual operation:
See
[:SOURce<hw>]:BB:DVBS2:SETTing:CATalog
Queries the files with settings in the default directory. Listed are files with the file exten-
sion
*.d2vbs
.
Return values:
<FileNames>
<filename1>,<filename2>,...
Returns a string of filenames separated by commas.
Manual operation:
See
[:SOURce<hw>]:BB:DVBS2:SETTing:DELete
<Delete>
Deletes the selected file from the default or the specified directory. Deleated are files
with extension
*.d2vbs
.
General Commands