System Description
R&S
®
TSME-Z3
8
Getting Started 1519.0994.02 ─ 02
2.4
Scanner and Mobile Device Configuration
The R&S
TSME-Z3 can be configured to support both scanner and mobile meas-
urements. The backpack has three mounting positions. Each position can hold
one of the following (as shown in
):
●
one R&S
TSME
●
two R&S
TSMEs (one on top of the other)
●
one mobile device
To mount one or two R&S
TSMEs at one position, one TSME-Z3T2 mounting kit
for two R&S
TSMEs is required. To mount one mobile device at one position, one
TSME-Z3M1 mounting kit for one mobile device is required.
The following configurations are possible:
Table 2-1: Possible R&S
TSME-Z3 configurations
Number of
R&S
TSMEs
Max. number of
mobile devices
Required mounting material
3 or 4
1
2x TSME-Z3T2
max. 1x TSME-Z3M1
1 or 2
2
1x TSME-Z3T2 and
max. 2x TSME-Z3M1
0
3
max. 3x TSME-Z3M1
In addition, up to two MIMO antennas (R&S
TSME-Z7 or R&S
TSME-Z8) can be
mounted in the backpack.
Mounting material:
●
TSME-Z3T2: R&S
TSME-Z3 mounting kit for 2 R&S
TSMEs, consisting of:
– connecting metal plate for 2 R&S
TSMEs
– base metal plate to connect bottom R&S
TSME to system unit
– 1 LAN cable and 1 power cable for each R&S
TSME
Scanner and Mobile Device Configuration
