Preparing for Use
R&S
®
TSME-Z3
11
Getting Started 1519.0994.02 ─ 02
a) Using 4 screws, screw the connecting metal plate of the R&S
TSME
mounting set to the bottom of the upper R&S
TSME.
b) Lay the upper R&S
TSME on the lower R&S
TSME so that the connectors
of both devices are on the same side. Using 2 screws on each side, screw
the connecting metal plate to the left and right sides of the lower
R&S
TSME.
Setting up the System