Option concept
R&S
®
TSME6
42
User Manual 4900.0033.02 ─ 06
–
1 months (variant .11)
–
3 months (variant .13)
–
6 months (variant .16)
–
12 months (variant .12)
4.4
Option sharing concept
Definition TSME Group
A group of TSMEs are all TSME or TSME6 receivers, which are loaded by a TSME
Admin (independent of their synchronization).
Technology Options
As soon as a technology option is valid on at least one TSME or TSME6 of the group,
it is allowed to perform measurements on all connected receivers for this technology in
the allowed frequency bands of the respective receiver.
Allowed Frequency Bands
An "All Band Option" (KAB) allows to measure the complete frequency band supported
by the hardware. On a TSME6, the complete frequency band is slightly larger than on
a TSME.
If there is no "All Band Option" (KAB) in a receiver, but only a non-empty set of band
options for 1 to 5 bands (K1B, ... K5B) each, then the upper limited number of bands
can be selected from a table for this receiver, which are then allowed for all measure-
ments.
The number of bands to be measured simultaneously is the sum of all activation num-
bers x from valid KxB options with a maximum of 5.
Example:
If two K1B and one K2B are installed on a TSME6, then it is permitted to measure in 4
bands simultaneously for this TSME6.
Special Scenario: MIMO
If a K300 is installed on a TSME or TSME6, then a measurement for technology option
index 130 (LTE MIMO) can be made on this TSME or TSME6 on all frequencies sup-
ported by the hardware.
The 5G NR FR2 demodulation with several TSME6 is also supported.
Option sharing concept
