Configuring the R&S TSME6
R&S
®
TSME6
53
User Manual 4900.0033.02 ─ 06
Label
Description
"Activation Type"
Activation can be permanent or temporary
"Valid From"
Start of validity for temporary license
"Valid To"
End of validity for temporary license
"Time to Expiration"
Time left until license expires
"Option Index"
for internal use only
"Format ID"
for internal use only
Finding the software license key files
Previously, license keys were shipped as
.xml
files. This function is only available for
compatibility reasons.
If you do not know the precise path and file name of the required software license key,
you can browse through the host PC's file system directly from the "R&S
TSME Device
Manager", by selecting the "Browse" button in the "Options" tab.
Entering key codes
Enter the 30-digit key code from the "License Keys List" in the "Key" field.
Alternatively, if available, copy the key code from the supplied PDF license key file and
paste it in the "Key" field.
To install the software license key on the currently selected R&S TSME6, select the
"Install" button (see
Installing a software license key
The software license key for which you have entered the key code in the R&S
TSME
Device Manager is installed on the currently selected R&S TSME6 when you select the
"Install" button. It then appears in the "Active Options" list with its validity dates and
other information (see
6.1.4
Configuring measurement bands - "Band Configuration"
Depending on which options are installed, various different bands and technologies
can be scanned by the R&S TSME6.
Before you can configure the measurement bands you must install all required soft-
ware license keys, see
Chapter 6.1.3, "Installing and managing software license keys -
The band configuration is stored permanently on the R&S TSME6.
When using a R&S TSME6 with a limited number of measurement bands, you must
consider the band configuration of the scanner when planning a measurement task.
The scanner provides only measurement results for those bands that are currently con-
figured on the scanner.
Using the R&S TSME device manager
