Troubleshooting
R&S
®
TSME6
62
User Manual 4900.0033.02 ─ 06
7
Troubleshooting
If errors occur during operation or connection of the R&S TSME6, the following infor-
mation may help you solve the issue.
Most errors that may occur during measurements with the R&S TSME6 are indicated
in the host PC software (e.g. R&S
ROMES, R&S
NESTOR, or the R&S
ViCom applica-
tion) and must be solved within the software. This chapter refers only to errors that
occur directly on the R&S TSME6.
In case measurement problems occur with the R&S TSME6, check the "Device Analy-
sis Output" table in the R&S
TSME Device Manager for any errors that may have been
detected at a first measure (see
on page 50). If available, a
repair function is provided.
7.1
Guide to solve instrument connection problems
The following flow-diagram demonstrates how to check the LAN connection to the
instrument when initial connection fails:
Guide to solve instrument connection problems