37 / 191 - EN -
5.3.
Disposal of packaging
Take the packaging materials to an appropriate disposal point and help to promote environmental protection. For
further information concerning the disposal of packaging material, please contact your local specialist, local authority
or municipal administration.
6.
Installation & assembly
6.1.
General safety information
WARNING
Risk of personal injury and property damage!
The pugmill may only be transported in an upright position. Failure to do so could result in
oil leaking out of the drive motor housing vent.
WARNING
Risk of personal injury and property damage!
The transport and assembly of the pugmill should be carried out by at least 2 people due to
its heaviness.
6.2.
General instructions
⇒
Place the machine on a flat surface.
⇒
Make sure it is in a safe position on a solid surface.
⇒
The distance to walls, other machines and traffic routes should be at least 10 cm on all sides.
6.3.
Transport
⇒
Transport the pugmill upright on the original pallet. Use load securing devices to move the machine.
⇒
For further transport without a pallet, lift the machine slightly by the handle and move it to the desired
location.
⇒
You can also use a forklift or stacker truck to lift and move the pugmill in an upright position by the steel
frame of the lower housing. Use load securing devices to move the machine.
Summary of Contents for TS 20
Page 194: ...20220224 01 ...
