40 / 191 - EN -
DANGER
Risk of personal injury and property damage!
Before switching on, check whether there are foreign objects in the mixing barrel.
8.2.
Switching the machine on & off
Process
Push-button
Description
Switching the
machine on
Press the green button.
Caution with the 400 V TS 20:
Check that the direction of rotation corresponds to the red arrow
on the mixing barrel.
Switching the
machine off
Press the red button.
Note:
Pull the power plug to switch off the machine completely.
8.3.
Emergency stop switch
In the event of emergencies and incidents involving the machine, activate the appropriate main circuit breaker for the
circuit to which the pugmill is connected.
8.4.
Note on the operating time
The gear oil of the drive motor must be changed every 4,000 operating hours or 4 years, whichever comes first.
Note:
During use, make a note of the operating hours or the operating time of the machine in order to be able to comply
with these intervals.
9.
Operation
9.1.
General operating instructions
To obtain a very well prepared, homogeneous clay body, the mixture should be put through the pugmill 2-3 times.
Summary of Contents for TS 20
Page 194: ...20220224 01 ...
