53 / 191 - EN -
Step
Action
Remark
6
Insert a new fuse.
Note:
The fuse can be inserted in both directions.
Fuse type:
Micro-fuse T 2 A
ROHDE item no.: 705080
7
Reinstall the fuse in reverse order.
Tool:
7 mm slotted screwdriver
8
Plug in the power plug and turn on the machine.
9
Check the machine works.
If the machine still cannot be switched on,
contact an electrician or the manufacturer.
14.
Disposal
The product must be properly disposed of at the end of its service life. To protect the environment, components
and packaging that are easy to dispose of have been predominantly used. When disposing of the machine, observe
the country-specific laws, regulations and standards. It is recommended that the machine be disposed of by a
qualified specialist company.
15.
Additional Information
15.1.
Notice of liability
The pugmill is built according to the state of the art and recognised safety rules. With proper operation, the risk to
people is reduced to a level that is acceptable given the current state of the art.
Incorrect use may create risks for people and property or damage to the machine. Immediately eliminate any
defects or malfunctions that could impair safety. Safety information cannot be construed against the manufacturer.
The manufacturer accepts no liability whatsoever for personal injury, damage to property or damage caused to the
product, as well as consequential damage caused or caused by non-observance of this instruction manual, during
repairs or any other actions by unqualified and unauthorised specialists on the product.
Any use beyond the area of application of the machine described in these operating instructions is not permitted.
The manufacturer is not liable for any resulting damage.
The manufacturer is also not liable for the use of non-approved spare parts. For your own safety, only use original
spare parts from the manufacturer!
No alterations may be made to the pugmill. If unauthorised changes result in damage to the machine or other
property or persons, no claims for damages can be made against the manufacturer.
Summary of Contents for TS 20
Page 194: ...20220224 01 ...
