DRY IRONING
The steam iron can be used on the dry setting with or without water in the water tank, it is best to
avoid having the water tank full while dry ironing.
Turn the variable steam control to the minimum position.
Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION:
If the steam iron has been used for a long time, it is hot and there is no water. Do not
refill it with water until the steam iron cools down.
BURST OF STEAM
The burst of steam feature provides additional steam for removing stubborn wrinkles.
Turn the variable steam control to the maximum position
Press the powerful steam button to release the burst of steam.
NOTE:
To Prevent water leakage from the soleplate, do not keep the powerful steam button
pressed for more than 5 seconds.
WHEN YOU FINISHED IRONING
Set the temperature dial to the minimum position.
Remove the main plug from the wall socket.
Stand the iron on heel rest.
CARE AND CLEANING
Before cleaning the steam iron ensure it is unplugged from the power supply and has completely
cooled down.
Do not use abrasive cleaners.
Σημείωση: Σας συνιστούμε να κρατήσετε τη συσκευή πάνω από το νεροχύτη σας ή πάνω από
μια λεκάνη για να περισυλλέξετε τις ακαθαρσίες.
SELF-CLEANING
It is important to apply “self
-
cleaning” at least every two months to remove
impurities etc.
Hold the iron horizontally and change the temperature control dial (Fabric Select Dial) to the
maximum position (MAX indication).
Turn and hold to the right the Adjust Steam Control Knob, and while holding on this position,
simultaneously press the Shot of Steam Button (Turbo).
Boiling water and steam will be ejected from the holes in soleplate with impurities washed out.
Note:
Please move the iron over the sink or a bowl to collect the impurities and water that will be
ejected.
