6
the degradation and damage of the grinding head
2
）
Never put sugarcane, coconut, kudzu or cereal (e.g. bean, rice) without being
soaked with water into this juicer for processing.
3
）
Do not put overmuch materials in the juicer each time, therefore, the materials
with less moisture and hard fiber shall be put into the hopper after being cut into
slices.
4
）
Assemble the buffer plate well in position
The buffer plate shall be assembled well in the residue outlet after finish cleaning each
time.
ASSEMBLE YOUR SLOW JUICER
1.
Firstly, assemble the jar onto the motor unit by following the operation as below:
Put the jar downwards and make the symbol “ ” on the jar aligns with the symbol “ ” on
the motor unit so that the jar can be locked on the motor unit tightly (See Fig.2). Make
sure the jar is assembled in position properly otherwise the appliance will not operate.
Besides, before operating, please check the buffer plate and make sure that it must be
assembled well in the residue outlet (See Fig.3).
2.
Then place the strainer into the rotary cleaning brush. And then push the rotary cleaning
brush (together with the strainer) downwards by making the symbol “
”on the strainer
align with the symbol “ ” on the motor unit. After it, put the grinding head into the
strainer and ensure the grinding head is covered well into the axis of the motor unit (see
Fig.4).
Fig.3
Fig.2
