LED Display
In AUTO, DRY CLOTHES AND INSIDE DRYING modes,etc., this figure displays room humidity.
When humidity is set in AUTO mode, this figure shows the set humidity; and displays the
set time in timer status, % represents percentage of humidity
Humidity setting
Once this key is pressed, the humidity is set circularly in the range of 30%-35%-40%-45%-
50%-55%-60%-65%-70%-75%-80%, and the humidity setting is only valid in AUTO mode
Mode key
During startup or timer on, press this key can select AUTO, DRY CLOTHES , etc. The
corresponding indicator lamp will light.
On/off key
Press this key to turn on or turn off the dehumidifier
Operating methods
R9212 series function
Setting of timer off
⚫
When the dehumidifier is running, press the [Timer key] to adjust time from 1h to
24h, pressing the key once to increase the setting time by 1h, after the setting time
exceeds 24h, the figure returns to 1 to start cycle. The Timer key can also be pressed
all the time, the time increases and changes circularly, when the set time expires,
the dehumidifier turns off automatically. After the setting is completed, if the Timer
key does not act at all within 5s, the set time is confirmed. In timer off state the key
lamp on, the [Timer key] is normally on.
Setting of timer on
⚫
When the unit is in standby state, the method for adjustment of setting time by the
[Timer key] is the same as timer off. After the setting is completed, if the Timer key
does not act at all within 5s, the set time is confirmed. In timer on state the key lamp
on the [Timer key] is normally on, and the set time is displayed on control panel.
