Espresso maker R-990
EN
9
*Nespresso
®
Original is a third party trademark, not connected to Vassilias
SA
2.
Insert the holder into the metal funnel handle. Note: To insert the holder into
the handle, make sure that the arrow on the lid is aligned with the group
notch. Turn the capsule holder to lock in its place.
3.
Insert the group capsule funnel into the appliance from the
“
Insert
”
position,
and you can fix them into coffee maker firmly through turn it anticlockwise
until it is at the
“
Lock
”
position.
4.
Press the coffee ON/OFF button to prepare the appliance. The indicator light
will turn on and the indication light will flash until the appliance is warm and is
ready.
5.
Once the indication light is illuminated, press the coffee switch, the pump will
work for 3 seconds and stop for 3 seconds, and then the pump will continue
working, there will be coffee flowing out. Press the coffee switch again when
the desired amount is got, and then the water pump stops working.
WARNING
: Do not leave the coffee maker unattended during making the
coffee, as you need operate manually sometimes!
6.
When you are finished, press the ON/OFF button and remove the plug from
the socket.
7.
Remove the metal funnel handle by turning it counterclockwise and allow to
cool before removing the capsule.
8.
Once the group and the holder have cooled, remove the holder by aligning the
arrow with the notch of the group. Open the lid of the holder and remove the
capsule.
9.
The working time for brewing coffee is 60 seconds at most, and the water
pump will stop working, press the coffee button again, the product can
continue to brew coffee.
MAKE HOT WATER
