7
National Rejectors, Inc. GmbH, Buxtehude
3
Lift up the latch and then swivel out the coin validator, see figure
below.
Ensure that the coin validator is properly connected with
the coin changer by the ribbon cable.
4
Fasten the housing of the coin changer in the vending machine with
screws.
5
Swivel the coin validator in again and let it engage.
Ensure that there is an air gap between the return lever of
the vending machine and that of the coin changer.
6
Connect the coin changer to the vending machine using the
required connecting cable and also connect any external devices,
such as hopper or recycler, to the coin changer.
7
If necessary, connect coin changer to power via the feeder (barrel
connector) for PC application.
8
Reconnect the vending machine to the mains supply.
1.
2.
