EN
4
Cleaning and maintenance
Manual cleaning
①
②
③
Wet the mop pad thoroughly
and clean it.
Wring water out from the pad.
Insert the long cleaning brush
into the dust inlet of the dual
spin electric mop, then rotate the
brush to remove the dust.
Caution
1. To dry mop the floor, just install the pad and start mopping, no need to wet it.
2. After cleaning the mop pads, be sure to thoroughly wring water out.
3. Do not use the long cleaning brush to clean items other than the dual spin electric mop.
4. Before using the long cleaning brush to clean the dual spin electric mop, make sure the appliance is
turned off.
5. Keep the long cleaning brush dry. Do not wet the brush when using it to clean the dual spin electric mop.
6. After use, clean the long cleaning brush and dry it under the sun light, to prevent mold and odor.
Troubleshooting
When the dual spin electric mop cannot work normally, please troubleshoot by yourself or contact the
customer service to help with troubleshooting
Error description
Cause
Solution
The dual spin electric mop
does not spin.
Battery is too low.
Check if the vacuum cleaner has sufficient
power. Recharge the battery fully before use.
No water sprayed from the
water outlet.
The water outlet is
blocked.
Clean the blocked water outlet, and check if
there is water in the water tank.
Technical data
Product name
Dual spin electric mop
Product model
XCQXZDS01*
Rated operating voltage
28.8 V
Rated power
30 W
Rated rotating speed
>200 r/min
Dimensions
ca. 290 x 78 x 295 mm
Net weight
ca. 1.25 kg
Water tank capacity
ca. 240 ml
Voltage of water pump
3 V
Noise level
<70 dB(A)
“*” symbol indicates the product color, e.g. B = black, W = white, G = gray, P = purple.
