EN
D SERIES
DIGITAL RADIATOR WITH WI-FI
43
By pressing
we can know the MAC address and RSSI, signal strength which
is measured in dbm. When this appears, if you press the power button once more,
it gives you the option to update the firmware. If you press the same button again
it will ask you “Wi-Fi?” and you will have to answer yes or no. It then restarts after
a few seconds of waiting. To exit the information screen, press
.
WIFI STATUS
MAC:
0 :50:93
C4:03:F6
RSSI:-70
5.8. MAIN MENU: EQUILIBRIUM / BALANCE SUB-MENU
The balance submenu makes the product work in MANUAL function with a constant
temperature of 19 °C. Access it by selecting the balance icon
using the keys
and
. Confirm by pressing the key
. Once pressed, the product returns
to the main screen, with the temperature set at 19°C and the MANUAL function
icon on.
5.9. MAIN MENU: PROGRAM SUB-MENU
This section explains the operational aspects of your product in its various functions and
modes.
What are the functions of MANUAL, AUTOMATIC and PILOT WIRE* functions?
MANUAL
This function allows you to change the product between the COMFORT, ECO and
ANTI-FROST modes and to change the temperature (see section 5.3).
AUTOMATIC
This function will activate the programming that has previously been set in the
product.
PILOT WIRE
This function allows the product to be controlled by a central programmer.
What are the COMFORT, ECO and ANTI-FROST modes?
COMFORT
ECO
ANTI-FROST
From 19ºC to 30ºC
From 7.5ºC to 18.5ºC
7ºC
