EN
SYGMA BAS
DIGITAL RADIATOR
33
5.6. MANUAL/AUTOMATIC FUNCTIONS
Press the
button to switch between the Manual and Automatic functions. The main
display will show the symbol for the AUTOMATIC function and the symbol for the
manual function.
MANUAL
AUTOMATIC
This function allows you to switch between
COMFORT, ECO and ANTI-FROST modes by
changing the temperature.
This function activates the programming stored
in the product.
5.6.1. MANUAL FUNCTION
This function allows you to vary the temperature by switching the product modes between
COMFORT, ECO and ANTI-FROST. To set the temperature in MANUAL mode see point 5.3. of
this manual. The icons for COMFORT, ECO and anti-freeze will appear when the temperature
changes to the above ranges. Depending on the selected temperature, you will see one of
these symbols on the display:
CONFORT
ECO
ANTI-FROST
From 19ºC to 30ºC
From 7.5ºC to 18.5ºC
7ºC
5.6.2. AUTOMATIC FUNCTION
To start programming, check that it is in the Automatic function, with the display showing
the symbol , press
to chenge the function. Once in Automatic function, press
and hold for 3 seconds to enter programming mode.
STEP 1 - Select the COMFORT mode temperature
The CONFORT mode
will be programmed first. Select the COMFORT mode temperature
between 19ºC and 30ºC with the
and
buttons. The icon and temperature will
flash; press the
icon to confirm.
STEP 2 - Select the ECO mode temperature
The ECO mode
will be programmed later. Use the
and
burtton to vary the
temperature within the range between 7.5ºC and 18.5ºC. The
icon and the temperature
will start flashing; once you are satisfied with the selection, press
to confirm.
