10
The first thing you will see is the sun symbol flashing, representing the comfort mode. The
comfort mode temperature will also be displayed.
Using the
and
buttons we can increase and decrease the temperature desired within
the comfort mode, from 20ºC to 30ºC.
This temperature will be applied later when programming an hour with the comfort mode
setting.
Once the comfort mode temperature is selected, press the
button so that the moon symbol
appears flashing. This symbol represents the economy (eco) mode. The economy mode
temperature will also be displayed.
Using the
and
buttons we can increase or decrease the eco mode temperature, from
15ºC to 19,5ºC. The selected temperature will be applied later when programming an hour
with the eco mode setting.
Next we press the
button to move to selecting the days of the week that we wish to program
from (Monday) to (Sunday). These numbers will initially be flashing and they will also be
represented by Sel1, Sel2, Sel3,... etc.
Pressing the on/off button
will select a day, which will stop flashing.
To select another day to be programmed, use
and
to change the day (we can move
directly from day to day and day to day , if required) and select each day by pressing
the on/off button
so that it stops flashing.
Repeat this until all the days you wish to be programmed have stopped flashing.
Once you are ready, we can move on to programming hour by hour by pressing the
button.
NOTE:
At this stage, it is possible that you have programmed the towel rails previously and
you are now changing the programming. When the days selected have different programming,
they will all change by default to the programming of the last day selected, which also happens
when programming with the remote control.
From the numbers we can see the selected hour in 24 hour display (0h is midnight, 01h,
02h,...).
On the hourly programming bar at the bottom of the screen you will see the programming
for the whole day and the selected hour flashing.
Use the
button to change between COMFORT ( symbol), ECO ( symbol) and OFF for
every hour.
Move through the hours using
or
and change each hour’s programming using the
button every time you wish to change the setting.
If you do not wish to change the programming of a particular hour, continue to the next hour
you wish to change. Once all of the hours are programmed, or left blank without programming,
