www.rojaflex.com
13
5.
Setting the overrun function
(function cloth length compensation)
The overtravel function to compensate for cloth
elongation can be set separately for both running
directions.
5.1
Setting the overrun function in OPEN direction
(Close awning).
5.1.1 Press the P2 - STOP - OPEN keys on the
handheld transmitter in succession.
Motor moves up/down and beeps.
Motor beeps 1 x = overrun function
deactivated
Motor beeps 3 x = overrun function activated
After the motor (the awning) has reached the
upper end position (awning closed), the motor
runs a short distance in the opposite direction of
travel to relax the fabric.
5.2
Setting the overtravel function in the DOWN
direction (Open awning).
5.2.1 Press the P2 - STOP - DOWN keys on the
handheld transmitter in succession.
Motor moves up/down and beeps.
Motor beeps 1 x = overrun function
deactivated
Motor beeps 3 x = overrun function activated
After the motor (the awning) has reached the
lower end position (awning open), the drive runs a
short distance in the opposite direction of travel
to relax the fabric.
Programming