4.0 Safety instructions
4.1 in general
This machine is provided with various safety equipment protecting the operator and the
machine as well. This, however, cannot involve all safety aspects. Therefore the operator
must read through and understand this chapter. He must moreover respect also other
aspects
of danger, refering to surroundings conditions and processed materials.
This manual takes in 3 categories of instructive safety symbols :
Appeal recommending to proceed entirely according to
following instruction(s). A dispatch or operator´s heavy injury
impends in case of non-performing this regulation.
Warning against improper techniques or machine using
ways, those can endanger human health, machine function-
ing, environment or cause economic worses.
Caution is an appeal to appropriate care during practising
of following activities. Non-performance of this caution can
cause a small sized injury or machine damage.
Follow instructions stated on shields, fixed on the machine. Do not remove nor damage
the shields. In any case of a shield damaging – always contact the producer !
4.2 Basic safety requirements
Never touch the low voltage system on the electric control
pannel, transformers, motors and terminal boards. Every of
mentioned unit is indicated with a shield.
- Before connecting machine to mains: Make sure that all safety parts are in active position
and check up their functioning. In case of necessary removing doors or protecting cover-
ings - switch off main switch and lock it or disconnect by towing plug from mains socket.
- Catchers of eventual back throw must be freely movable and its functioning controled
regularly several times a day.
- When door or protecting covering are apart - do not connect the machine to the mains.
To avoid incorrect operating – learn positions of switches
before machine starting.
Remember position (location) of emergency switch to be
able to use it at once any time.
- Avoid touching some switch(es) by chance on running machine.
- Never touch rotating tool by hands or somewhat else.
- When you will not work on at the machine – switch it off by control pannel switch and dis-
connect it from the mains.
- Before cleaning : Switch off the machine and lock the main switch or tow plug off socket.
- Before doing maintenance inside machine : Always switch it off and lock main switch
or disconnect plug from mains socket.
- When more workers operate the machine – do not begin another work not having informed
other worker about your intention how you will run on.
- Do not do up the machine in any way able to endanger its safe operating.
- In doubts about correctness of technique – contact a responsible person.
