• Remove the rear lens cap and the camera body cap.
• Align the white index mark (dot) on the lens barrel with the white
index mark (dot) on the lens mount of the camera.
• Do not press the lens release button on the camera when mounting
the lens.
• Insert the lens into the camera mount and rotate it clockwise until it
“clicks” and locks into place. Do not insert the lens at an angle.
• Remove the front lens cap when you are ready to shoot.
• Attach the front lens cap.
• While holding down the lens release button on the camera body,
rotate the lens counterclockwise until it stops and separate the lens
from the body.
• Attach the rear lens cap.
IO85AF-RF
F1.4~16
Canon RF
28.9° / 19.1°
2.95ft ( 0.90m)
UMC
X 0.11
77mm
9
Yes
20.6oz (583.8g)
11 Elements in 8 Groups
(Including 1 ED and 4 HRI)
The supplied hood is designed specifically for the Rokinon AF 85mm
F1.4 lens for optimum effectiveness. It should be used at all times to
help prevent contrast reducing flare, provide better contrast and for
added protection.
• To mount the hood, align the white index mark (dot) of the hood
with the white hood index mark (dot) of the lens and rotate the hood
clockwise until you hear and feel it click in place.
• To remove the hood, grasp it firmly and turn counterclockwise.
Lens Hood
3.5” (88.0mm)
3.84” (97.5mm)
Length
Coating
Filter Size
- The minimum focus is the distance from the image sensor to the object.
- The product specifications and exterior are subject to change without notice.
- The supported functions of this product may vary according to the camera
model
Removable Hood
Manual Focus Ring
Lens Mount
AF / Manual Switch
White Index Mark
Contacts
AF / MF Mode Switch
Yes
AF Motor
LSM
Maximum Diameter
Number of Aperture Blades
Weather Sealed
Maximum Magnification
Minimum Focusing Distance
Optical Construction
Angle of View
(Full Frame / APS-C)
Aperture Range
