background image

3

EN

SAFETY

Life is the greatest value. ROKKY is an electrical product. Take care 
of your and your loved ones’ safety. Familiarize yourself with the ba-
sic principles of product use.

1.  Use only a working product. If you notice any external damage, con-

tact an electrician before connecting the device to a power source. 

2.  Before connecting the device, check that the voltage stated on the 

nameplate matches the voltage in the domestic electrical system.

3.  Check regularly that the power cord has not been damaged and that 

it is safe to use.

4.  Remember!

 A damaged cord should only be replaced by a qualified 

specialist. Entrust the exchange to those who have the appropriate 
permissions.

5.  Do not mount a device that is connected to a voltage. 
6. 

Do not allow the heater to be flooded with water under the threat of 

loss of life.

7. 

When standing in a bathtub, paddling pool or barefoot on a wet floor, 

do not touch the device.

8. 

ROKKY is intended for home, office and hotel use.

9.  ROKKY is not intended for use by children or people with limited 

mental performance or who do not have the necessary knowledge 
or experience in the use of similar equipment. In this case, supervi-
sion or appropriate training by persons responsible for their safety 
is necessary.

Summary of Contents for Rokky Heat

























Reviews: