Installation Manual
22
Location: 003 Phone Number: Secondary Central Station (Central Station 2)
The second Central Station phone number. The definition is the same as in Location
002.
Location: 004
Callback UD Phone Number
This is a number to which the alarm company computer, equipped with the U/D
software, will be connected and to which the ORBIT-14 will call back. This provides
more security for U/D operations.
When a call is made from a computer, using U/D software, to the ORBIT-14 panel,
the system will hang-up and call back using this UD phone number. Up to 32 digits
can be entered into the U/D phone number. Include all the digits and functions as in
Location 002. To delete an existing phone number, press
#
.
Location: 005
Account Number
Default: 0000
The system’s Central Station Account Number. The ORBIT-14 accepts hexadecimal
account numbers (those using 0 through 9 and A through F); use the key
combinations below (in LED keypads only) to enter hexadecimal digits “A” through
“F”:
NOTE:
Use the “0” digit only to define account numbers with less than four digits. For example, for
account number 123, enter 0123. In this case the ORBIT-14 will not send the “0” digit to the
Central Station.
To use an account number with “0” digit, for example “1207”, use the “A” digit instead of “0”
digit. For example, for account number 1207, enter 12A7. The sequence of buttons will be:
[1][2][STAY][1][7]
System Codes: Locations 006-010
Location: 006
Access Code
Default: 5678
Provides data security during Upload/Download operations. This Access Code must
subsequently be entered into the corresponding account profile in the
Upload/Download software. For successful communication, the Access Code must be
the same for the both the Upload/Download software and the Main Panel.
Location: 007
Remote ID Code
Default: 0001
An ID Code that serves as an extension of the Access Code, described in the
procedure above. The ID code provides data security during Upload/Download
operations. This Remote ID Code must subsequently be entered into the
corresponding account profile in the Upload/Download software. For successful
communication, the ID Code must be the same for both the Upload/Download
software and the Main Panel.
Hex digit
Press
Hex digit
Press
A
[STAY], 1
D
[STAY], 4
B [STAY],
2 E [STAY],
5
C [STAY],
3 F [STAY],
6
Summary of Contents for ORBiT-14
Page 1: ...Installation Manual...
Page 6: ...Installation Manual vi...
Page 57: ...Notes...
Page 58: ...Notes...
