Roksan Audio K3 CD Di, Set Up Manual And Product Manual

C O N N E C T I N G   M A I N S   P O W E R

The moulded IEC plug of the supplied mains lead should be plugged into the AC Mains 

Input Socket on the rear of the unit first and then plugged into the mains supply.   The 

Mains Power Switch is on the left front underside of the CD player.   

S I G N A L   C O N N E C T I O N S
Analogue Outputs

The Analogue Outputs use gold plated RCA phono sockets or gold plated balanced 

XLR sockets and should be connected to the CD or Line input of your amplifier.

Digital Outputs

The Digital Outputs use gold plated RCA phono socket for coaxial SPDIF, Tos-Link for 

optical and XLR for balanced AES/EBU output.  Any of these could be connected to a 

corresponding input of an amplifier with a digital input, or to an outboard Digital to 

Analogue Converter (DAC).

Digital Inputs

The K3 CD Di features two digital inputs:

• 

1 x Coaxial RCA

• 

1 x Toslink Optical

Any device with a digital output can be connected to the K3 CD Di and the signal will 

be fed to the analogue outputs of the player into the relevant amplification.  If the 

digital source device you wish to connect has either coaxial, optical (or both) digital 

output(s) it can be connected to the K3 CD Di to utilise the player’s circuit for superior 

sound performance. 

S W I T C H I N G   O N

The Mains Power Switch is on the left front underside of the CD player.  This switch can 

be left on; if however the CD player is likely to be unattended for a long period, switch it 

off and unplug the mains lead from the wall.

When switched on, your K3 CD Di display will illuminate.  

5

K3 CD Di

ENGLISH