ROL | ERGO Sweden W: www.rolergo.com P: +46 36 36 88 80
12
CAUTION
Risk of Pinching.
When you change the desktop position (especially without using pinch protection), you
must ensure that no people or objects are located in the hazardous area nor may reach
into it.
NOTICE
In case of a main power breakdown, or if the power cord is unplugged during the move-
ment of the drives, a manual reset may be necessary! Please see section 3.2.
NOTICE
The control unit might be damaged by power surges. Unplug the power cord during a
thunderstorm or if you do not intend to use the desk for a longer period.
3.1 Basic functions
NOTICE
You must read the user manual carefully before installing or operating the control unit.
If chosen handset doesn’t fit to this user manual, please see actual user manual for actual
handset.
Over load protection!
If the total load on the equipment is to high you will only be able to drive for 2 seconds.
The system will then stop and you need to release button and press button again.
Over heat protection!
If heavy loaded and driven continuously for a long period of time the motor might get
very hot. This is observed by the software and if overheated system will shut down and
you will have to wait about 5 minutes before being able to run again.
