background image

3

ROL | ERGO Sweden    W: www.rolergo.com    P: +46 36 36 88 80

Your safety and the safety of others is very important. Please familiarize yourself with all 
instructions and safety warnings before operating the table. Please keep this manual for 
future reference. 

To help you make informed decisions about safety, we have provided operating proce-
dures and other information on labels and in this user’s manual. This information alerts 
you to potential hazards that could hurt you or others. It is not practical or possible to 
warn you about all the hazards associated with operating or maintaining a table. Please 
use your own good judgment. 

You will find important safety information in a variety of forms. Safety Messages  
preceded by a safety alert symbol 

and one of three signal words: 

DANGER

,  

WARNING

 or 

CAUTION

. These safety messages are listed in order of severity, identify 

the general risks and what actions you are to take to avoid the risks. These signal words 
mean: 

DANGER

Indicates an imminent hazardous with a high risk of serious injury or death.

WARNING

Indicates a potentially hazardous situation that if not avoided may could result in 
serious injury or death.

CAUTION

Indicates a potential hazardous, which may result in minor or moderate injury. It 
may also be used to alert against unsafe practices.

NOTICE

Indicates an alert to call attention to proper assembly instructions or particular 
operation procedures to assure correct equipment function and to avoid equip-
ment damage or wear. 

The information and specifications included in this manual were in effect at the time of 
approval for printing. Knoll reserves the right to discontinue or change specifications or 
design at anytime without notice and without incurring any obligation whatever.

1. 

IMPORTANT INFORMATION - SAFETY FIRST!

Summary of Contents for ECS2Series




















Reviews: