5
ROL | ERGO Sweden W: www.rolergo.com P: +46 36 36 88 80
WARNING
Risk of Injury to Persons:
1.
Do not use this table to lift people and do not use the table to lift heavy part or use
this table as a platform for storage.
2. Maximum intended load is 120 kg uniformly distributed (265 pounds) including the
table top.
DANGER
Risk of electric shock, injury, or death:
1.
Improper usage, abuse, or misuse of the power supply, handset, motors and other
electrical components may result in an electrical shock injury or possible death.
2. Do not open the power supply unit or handset under any circumstances. The power
supply and handset contain no serviceable parts.
3. Do not modify or make any changes to the power supply, handset or other electrical
devices.
4. During installation, repair, cleaning, or maintenance work, the power cable must be
disconnected from the outlet.
5. Improper usage, abuse, or misuse of the power supply, handset, motors and other
electrical components may result in an electrical shock injury or possible death.
6. Do not open the power supply unit or handset under any circumstances. The power
supply and handset contain no serviceable parts.
7. Do not modify or make any changes to the power supply, handset or other electrical
devices.
8. During installation, repair, cleaning, or maintenance work, the power cable must be
disconnected from the outlet.
9. The engines/motors control unit is not designed for continuous operation. Changing
the desktop position without interruption must not exceed the duty cycle indicated
on the power supply. The unit is thermally protected and will temporarily shut down
if use exceeds the duty cycle. Allow a 9-minute cooling period for the control unit
to reset.
10. The power supply unit may only be operated with voltage as specified on the power
supply label.
11. Only use the power cord supplied with the power supply. Check that it is not dama-
ged. Do not operate the power supply unit if the power cord is damaged.
12. Connect the power supply to a proper outlet only. To disconnect turn all controls to
the off position, then remove plug from outlet.
