13
ROL | ERGO Sweden W: www.rolergo.com P: +46 36 36 88 80
4.1.3
Limits
If the software version in the handset is 4.20 or later it has an editable memory for high
and low (stand and sit) position. It could also be used to avoid collision with i.e. a cabinet
or pedestal. When a memory position is set the desk will stop when the memory position
is reached. To drive the desk outside the memory position press the up or down button
for a minimum of 5 seconds.
How to set memory/end positions:
1.
Drive your desk to the level you want to store.
2. Press both buttons 3 times (0,5-1 second between each pressing).
3. Then press ”up” or ”down” to set the position (0,5-1 second).
4. Do the same procedure for your second store.
Set ”Upper limit”
Set ”Lower limit”
Above
”Upper limit”
>5 sec
>5 sec
Below
”Lower limit”
