background image

7

ROL | ERGO Sweden    W: www.rolergo.com    P: +46 36 36 88 80

DANGER

• 

Improper usage, abuse, or misuse of the power supply, handset, motors and other 
electrical components may result in an electrical shock injury or possible death.

• 

Do not open the power supply unit or handset under any circumstances. The power 
supply and handset contain no serviceable parts.

• 

Do not modify or make any changes to the power supply, handset or other electrical 
devices.

• 

During installation, repair, cleaning, or maintenance work, the power cable must be 
disconnected from the outlet.

• 

Connect this desk to a proper outlet only.

• 

The power supply unit may only be operated with voltage as specified on the power 
supply label.

• 

Only use the power cord supplied with the power supply (Flexible cord 2-pol 
SJT-2 2x18AWG 105°C 300V VW-1 CSA). Make sure that the cord is not damaged 
before usage. Do not operate the power supply unit if the power cord is damaged. 
A damaged cord shall only be changed by authorised personnel. 

• 

Do not expose the power supply, handset or other electrical device to water or other 
liquids including moisture, drips, splashes or spills.

• 

Do not operate the power supply, handset or other electrical device in a potentially 
explosive atmosphere. Do not operate where aerosol spray products are being used 
or where oxygen is being administered.

• 

Do not use the product if it has been dropped or damaged. Contact the manufacturer 
for examination or repair.

• 

The desk must not be structurally or technically altered or modified in any way.

WARNING

• 

This desk is not intended for use by children or individuals with limited physical, 
sensory or mental abilities or with a lack of experience and/or lack of expertise, 
which may affect the ability to safely operate equipment, unless they are 
supervised by a person responsible for their safety.

• 

Use this desk only for its intended use as described in these instructions. Do not 
use attachments not recommended by the manufacturer.

• 

Keep the cords away from heated surfaces.

2. 

SAFETY INSTRUCTIONS

Summary of Contents for Serie Ei - iDrive






















Reviews: