Rolair JC10, Owner'S Manual

- 2 - 

PARTS 

Genuine ROLAIR

®

 replacement parts are sold nationwide through a network of authorized dealers and 

service centers. Please contact the dealership where your air compressor was purchased or our 
factory Customer Service Department if you need help troubleshooting, obtaining parts, or locating an 
authorized ROLAIR

®

 service representative. 

RECORD OF PERTINENT INFORMATION 

Make a permanent record of the model and serial number of your new air compressor here. You’ll save 
time and expense by including this reference information when requesting service or replacement parts. 
 

Place & Date of Purchase 

Volts 

Model  

HZ 

Serial # 

HP 

 
With the tank gauge at 0 PSI and air line(s) disconnected, close drain valve(s) and record the amount of time 
it takes to build tank pressure on the space provided. Periodically test your air compressor against this 
pump-up time to determine if it is operating correctly. If time test is considerably off, contact your local 
ROLAIR

®

 representative to arrange service. 

From 0 to ______*PSI 

From 0 to ______*PSI 

Date Min  Sec 

Date Min  Sec 

*Factory top pressure settings vary. Write down the top pressure setting of your machine after performing 
the initial pump-up time test. 

WARNING

COMPRESSOR DISCHARGE AIR MAY CONTAIN HYDROCARBONS AND 

OTHER CONTAMINANTS! DO NOT USE DISCHARGE AIR FOR BREATHING

! 

1.

Give compressor model number 

2.

Give compressor serial number 

3.

Name of part 

4.

Part number 

5.

Quantity required 

To order replacement parts: