background image

 

Guarantee 

 

Associate Engineering Corporation warrants that all 

ROLAIR

 compressors will be free of defects in 

material and workmanship for a period of twelve months from the date of initial retail purchase, or 
eighteen months from the date of manufacture, whichever may occur first. 
 
Should any failure to conform to this warranty be reported to the company within said period, the 
company shall, upon purchaser shipping the compressor to our plant transportation prepaid, correct 
such nonconformity by suitable repair or, at its option, furnish a replacement part F.O.B. our plant. 
 
Associate Engineering Corporation shall not be liable for any unauthorized repairs, replacements, 
adjustments to the compressors, or the costs of labor performed by the purchaser. 
 
This warranty is expressly in lieu of all other warranties expressed, implied or statutory (including, 
but not limited to, warranties of merchantability and fitness for purpose) and of any other 
obligations, and/or liabilities on the part of Associate Engineering Corporation.  Associate 
Engineering Corporation neither assumes nor authorizes any other person to assume for it any 
other obligations or liability in connection with or with respect to any compressor. 
 
Associate Engineering Corporation shall in no event be liable neither for any consequential, incidental 
or special damages nor for the improper selection of any compressor for a particular application. 
 

Quality 

Associate Engineering Corporation is devoted to continual quality control and thorough 
research of the products we build.  It is our creed to give you, the user, all of the 
experience and engineering available in the production of every piece of equipment we 
produce. 
 
Our line covers the complete needs of today’s varied air requirements.  Rely on ROLAIR for 
all the newest and finest features that are available for the modern compressor. 

4/12 

606 South Lake Street > P.O. Box 346 > Hustisford, WI 53034-0346 > 920.349.3281 > fax 920.349.3691 > www.rolair.com 

Summary of Contents for STATIONARY AIR COMPRESSOR









Reviews: