23
10
Hitching the trailer to a bicycle
11
Maintenance and care
Only attach the trailer coupling to bicycles that have been approved for this purpose by the
manufacturer. Read the bicycle manufacturer‘s owner‘s manual.
Maintenance frequency may vary depending on riding conditions. Have repairs carried out by
qualified personnel only and with original spare parts.
Do not use mineral or plant oils.
Never oil or grease the tow arm and the tow arm mount.
Do NOT attach the trailer coupling to carbon components.
To securely hitch the trailer to your bicycle or pedelec, you will need a coupling. Only use tried-and-tested
couplings. Ask your specialist retailer for advice.
Recommended products include couplings from Weber: www.weber-products.de
and accessories from Hebie: www.hebie.de
Check the following before each ride:
•
The coupling system is securely connected to the bike.
•
Whether the tow arm has any deep nicks or other damage.
•
The tyre pressure is at 2.5 bar. Information on the prescribed tyre pressure can also be found on
the side walls of the tyres. Observe the specifications for the minimum and maximum pressure.
•
Damage to tyres and rims, whether these run true or if any foreign bodies may be stuck in them.
•
The tension of the spokes.
•
The screw fittings for the panels and/or rail are seated securely.
•
The load is correctly distributed and secured.
•
The lights work and are adequately charged.
Check every 3 months:
•
Check all attachments for damage, cracks and breakage, especially the connecting elements
(coupling and tow arm) between the bicycle and trailer.
•
The tensioning of all screw fittings.
Lubricate every 3 months:
•
The coupling‘s rotary bearing with plastic-safe silicone oil.
•
The coupling lock with graphite powder.
•
The wheel clevis axles with commercially available grease.
Instructions for storage and care:
•
Store your trailer in a dry room.
•
Protect the trailer from bright sunlight and moisture.
•
Clean your trailer immediately after use in winter and remove any road salt.
•
Clean the tow arm mount regularly to remove any sand residue.
