12
Jun. 2021
AE-30
10.
Press .
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc9.eps
11.
Press .
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc10.eps
12.
Press .
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc11.eps
13.
Press .
The following screen is displayed. Verify that sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc12.eps
14.
Detach the headphones from the
PHONES
jack and connect it to the
OUTPUT
jack.
15.
Press .
The following screen is displayed. Verify that sounds are coming out
from the L side of the headphones, not from the R side.
16.
Press .
The following screen is displayed. Verify that sounds are coming out
from the R side of the headphones, not from the L side.
fig.test8-sc14.eps
17.
Press .
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc15.eps
18.
Press .
The following screen is displayed. Verify that no sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc16.eps
19.
Press .
The following screen is displayed. Verify that sounds are coming out
from the L/R sides of the headphones.
fig.test8-sc17.eps
20.
Detach the headphones.
21.
Press
to advance to the next test item.
9. BLUETOOTH
This verifies the Bluetooth function.
* When the unit enters this test item, pop noise is heard from the on-board
speakers.
* For explanation in this section, we will choose iPhone as an example of the
mobile device with Bluetooth function.
fig.test9.eps
1.
Place an iPhone near the AE-30.
2.
On the iPhone, enter
Settings
and set
Bluetooth
on.
3.
On the Bluetooth setting screen, touch
AE-30 Audio **
.
When pairing succeeds,
Connected
is displayed on the right of
AE-30
Audio **
and the screen display of AE-30 is changed from
A2DP:--
to
A2DP:OK
.
4.
Start Web MIDI on the iPhone.
5.
Go to the bottom right of the Web MIDI screen and touch
, then touch
Setup Bluetooth MIDI Central
.
6.
On the
Bluetooth MIDI Devices
screen, touch
AE-30 **
.
7.
When you are requested to pair, touch
Pair
.
When pairing succeeds,
Connected
is displayed on the right of
AE-30 **
and the screen display of AE-30 is changed from
BLE:--
to
BLE:OK
.
8.
Press .
fig.test9-2.eps
9.
Play back any music on the iPhone and verify that sound is produced
from the on-board speaker of the AE-30.
10.
Press
to advance to the next test item.
10. MIDI
This checks the operation of MIDI IN/OUT.
fig.test10.eps
1.
Using the MIDI cable, connect the
MIDI IN
connector to the
MIDI OUT
connector.
2.
Disconnect the MIDI cable.
Execution automatically advances to the next test item.
11. USB FUNC
This checks the operation of the
USB
connector (COMPUTER).
fig.test11.eps
Midi Out [A0 51 00]
is displayed on the screen.
1.
Using the USB cable, connect the
USB
connector to the computer.
2.
Start MIDI-OX on the computer.
3.
Click
Options
->
MIDI Devices...
.
The
MIDI Devices
window appears.
4.
Set
MIDI Inputs
to
AE-30
and click
OK
.
5.
Verify that
A0 51 00
is displayed at the Input window on the MIDI-OX
and the computer receives the MIDI messages.
6.
Disconnect the USB cable.
7.
Press
to advance to the next test item.
T-S
08/14
AUDIO
9/17
Phone Mute Audio
T-S
08/14
AUDIO
10/17
Phone Mute Amp
T-S
08/14
AUDIO
11/17
Phone Reset DAC
T-S
08/14
AUDIO
12/17
Phone Out L/R
T-S
08/14
AUDIO
14/17
Line Out R
T-S
08/14
AUDIO
15/17
Line Mute Audio
T-S
08/14
AUDIO
16/17
Line Reset DAC
T-S
08/14
AUDIO
17/17
Line Out L/R
T-S
09/14
BLUETOOTH
4/5
BT ID: **
BLE : -- A2DP: --
T-S
09/14
BLUETOOTH
5/5
Check BT Audio
T-S
10/14
MIDI
1/1
Midi Loop Test
T-S
11/14
USB FUNC
1/1
Midi Out [A0 51 00]
