background image

2

USING THE UNIT SAFELY

ALWAYS OBSERVE THE FOLLOWING

Used for instructions intended to alert 
the user to the risk of injury or material 
damage should the unit be used 
improperly. 

* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic 
animals or pets. 

Used for instructions intended to alert 
the user to the risk of death or severe 
injury should the unit be used 
improperly. 

The 

 symbol alerts the user to things that must be 

carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In 
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet. 

WARNING

CAUTION 

The      symbol alerts the user to important instructions 
or warnings.The specific meaning of the symbol is 
determined by the design contained within the 
triangle. In the case of the symbol at left, it is used for 
general cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never 
be carried out (are forbidden). The specific thing that 
must not be done is indicated by the design contained 
within the circle. In the case of the symbol at left, it 
means that the unit must never be disassembled. 

• Before using this unit, make sure to read the

instructions below, and the Owner's Manual.

......................................................................................................

• Do not open (or modify in any way) the unit or

its AC adaptor.

......................................................................................................

• Do not attempt to repair the unit, or replace

parts within it (except when this manual pro-
vides specific instructions directing you to do
so). Refer all servicing to your dealer, or quali-
fied Roland service personnel.

......................................................................................................

• Never use or store the unit in places that are:

•Subject to temperature extremes (e.g., direct

sunlight in an enclosed vehicle, near a heat-
ing duct, on top of heat-generating equip-
ment); or are

•Damp (e.g., baths, washrooms, on wet

floors); or are

•Humid; or are
•Dusty; or are
•Subject to high levels of vibration.

......................................................................................................

• This unit should be used only with a rack or

stand that is recommended by Roland.

......................................................................................................

• When using the unit with a rack or stand rec-

ommended by Roland, the rack or stand must
be carefully placed so it is level and sure to
remain stable. If not using a rack or stand, you
still need to make sure that any location you
choose for placing the unit provides a level sur-
face that will properly support the unit, and
keep it from wobbling.

......................................................................................................

• Be sure to use only the AC adaptor supplied

with the unit. Also, make sure the line voltage
at the installation matches the input voltage
specified on the AC adaptor's body. Other AC
adaptors may use a different polarity, or be
designed for a different voltage, so their use
could result in damage, malfunction, or electric
shock.

......................................................................................................

• Avoid damaging the power cord. Do not bend

it excessively, step on it, place heavy objects on
it, etc. A damaged cord can easily become a
shock or fire hazard. Never use a power cord
after it has been damaged.

......................................................................................................

• This unit, either alone or in combination with

an amplifier and headphones or speakers, may
be capable of producing sound levels that
could cause permanent hearing loss.  Do not
operate for a long period of time at a high vol-
ume level, or at a level that is uncomfortable.  If
you experience any hearing loss or ringing in
the ears, you should immediately stop using
the unit, and consult an audiologist.

......................................................................................................

• Do not allow any objects (e.g., flammable

material, coins, pins); or liquids of any kind
(water, soft drinks, etc.) to penetrate the unit.

......................................................................................................

WARNING

WARNING

Summary of Contents for AF-70

















Reviews: