2.4.3 Login Instructions
Before Logging In
Connecting to the AR-3000SD via FTP requires that the IP address be set and other settings for the
AR-3000SD be made.
Note:
The IP address, subnet mask, and gateway settings become effective the next time the
AR-3000SD’s power is turned on; thus once the IP address is changed, the IP address
appearing in the LCD screen differs from the actual IP address until the power is turned
off and then on again.
Here is an example of an FTP connection with the conditions as shown below.
Conditions
Web browser:
Internet Explorer
AR-3000SD IP address:
192.168.10.2
Login name:
anonymous (Login name is fixed)
Password: None
(initial setting) or ABCDEFGH
Port No.:
20 and 21
1) Enter the IP address as the URL in the browser, as shown below.
(a)When the AR-3000SD is set to “no password”
Enter as ftp://[IP address].
ftp://192.168.10.2
(b)When “ABCDEFGH” is set as the password
Enter as ftp://anonymous:[password]@[IP address].
ftp://anonymous:ABCDEFGH@192.168.10.2
2) The AR’s file list appears in the web browser.
Initially, the transfer mode is set to BINARY.
3) Drag and drop to transfer files.
AR-3000SD (Ver.1.00) Command Reference - 18
