manualshive.com logo in svg

Roland AT800 Music Atelier, Owner'S Manual

The Roland AT800 Music Atelier is a versatile and powerful musical instrument that offers incredible creative possibilities. With its extensive Midi Implementation Manual, users can unleash their full potential. You can easily download this manual for free from our website, ensuring seamless access to this invaluable resource.

Share
Download
background image

 

2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

CAUTION

:   TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the 
literature accompanying the product.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING 

- When using electric products, basic precautions should always be followed, including the following:

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with a dry cloth.

7.

Do not block any of the ventilation openings. Install in 
accordance with the manufacturers instructions.

8.

Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided plug 
does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.

WARNING:
IMPORTANT:

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying 

the terminals in your plug, proceed as follows:

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the 

letter E or by the safety earth symbol     or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.

THIS APPARATUS MUST BE EARTHED
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE

For the U.K.

10. Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus.

11. Only use attachments/accessories specified by the 

manufacturer.

12. Use only with the cart, stand, tripod, bracket, 

or table specified by the manufacturer, or 
sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does 
not operate normally, or has been dropped.

WARNING:

 To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

AT-800_e.book 2 ページ ２００８年１０月１５日　水曜日　午前９時３７分

Summary of Contents for AT800 Music Atelier





































































































































































































































































































Reviews:

No comments

Related manuals for AT800 Music Atelier

GETT CLEANDESK Quick Start Manual preview
CLEANDESK
Brand: GETT Pages: 2
Nordson RA-20R Operator Card preview
RA-20R
Brand: Nordson Pages: 8
Palm 3245WW - Wireless Keyboard With Bluetooth Technology Disassembly Instructions Manual preview
3245WW - Wireless Keyboard With Bluetooth Technology
Brand: Palm Pages: 26
FAAC F0254 Manual preview
F0254
Brand: FAAC Pages: 10
Tecknet X333 User Manual preview
X333
Brand: Tecknet Pages: 9
Tecknet X360-Black-UK User Manual preview
X360-Black-UK
Brand: Tecknet Pages: 21
Tecknet X300 User Manual preview
X300
Brand: Tecknet Pages: 20
Tecknet T21 User Manual preview
T21
Brand: Tecknet Pages: 26
Franklin Dictionary & Thesaurus MWD-1470 User Manual preview
Dictionary & Thesaurus MWD-1470
Brand: Franklin Pages: 75
Roland AT15 Music Atelier Owner'S Manual preview
AT15 Music Atelier
Brand: Roland Pages: 120
Babolat POP Quick Start Manual preview
POP
Brand: Babolat Pages: 6
i3 International i3C762 User Manual preview
i3C762
Brand: i3 International Pages: 2
FAVI FE02RF series Manual preview
FE02RF series
Brand: FAVI Pages: 2
Natec TURBOT User Manual preview
TURBOT
Brand: Natec Pages: 14
Cavislim YS30 User Manual preview
YS30
Brand: Cavislim Pages: 48
Monoprice 13858 User Manual preview
13858
Brand: Monoprice Pages: 2
perixx PERIBOARD-706 PLUS User Manual preview
PERIBOARD-706 PLUS
Brand: perixx Pages: 21
Gear Head KB1000W User Manual preview
KB1000W
Brand: Gear Head Pages: 7

Brands by name

Popular brands

Load more brands