141
Applying Various Effects to the Sound
Applying Various Effects to the Sound
Rotary is an effect which simulates the sound of rotating speakers.
There is a choice of two settings: Fast and Slow.
fig.05-06.eps
1.
Select the voice to which you wish to apply the Rotary
effect.
2.
Press the Rotary Sound [On/Off] button (confirm that its
indicator is lit).
The Rotary effect will be applied to the voice.
3.
Press the Rotary Sound [Fast/Slow] button to switch
between Rotary Fast (Lit) and Rotary Slow (Unlit).
When you switch the rotary effect from “Fast” to “Slow,” the modulation will
slow down gradually, and when you switch from “Slow” to “Fast” the
modulation will speed up gradually.
Adding Modulation to the Sound (Rotary Effect)
Rotary [Fast/Slow] button
Effect
Lit (Fast)
The effect obtained is equivalent to speakers being
rapidly rotated.
Unlit (Slow)
Effect simulating the slow rotation of speakers.
NOTE
For more on the tones to which
the Rotary effect can be
applied, refer to “Voice List”
(Appendix: separate booklet).
You can assign the Rotary
Sound [Fast/Slow] button
function to the foot switches
located on each side of the
Expression Pedal (p. 134).
AT-800_e.book 141 ページ ２００８年１０月１５日 水曜日 午前９時３７分
