3
®ÂØÒňÎ
®
ME-70
H
ow
D
o
I e
DIt
a
P
atcH
?
While you select banks and patches in Memory mode, Memory Edit mode allows you to edit the effect parameters
in the currently selected patch. Use the following steps to enter and use Memory Edit mode:
Select a patch to edit in Memory mode.
1
Press the EDIT/EXIT button—the ME-70 switches to Memory Edit mode and “Ed” appears in the display.
2
Use the knobs, pedals, and buttons to modify the sound as desired. The pedals switch the effects on and off,
3
and the
3
and
4
buttons under the display adjust the Noise Supressor Threshold parameter.
When you’re finished, press the EDIT/EXIT button to return to Memory mode.
4
To save changes you’ve made, press the WRITE button, choose a user bank and patch number, and then
5
press the WRITE button again.
How Do I Edit a Patch?
