Roland BOSS OD-200, Owner'S Manual

Overall Settings (Menu)

11

Parameter

Explanation

EPF  

(EXPRESSION FUNCTION) 

Specifies the function of an expression 

pedal connected to the CTL 1, 2/EXP jack.

oFF

:

 No operation.

DRV

(DRIVE)

 :

 The same operation as the 

[DRIVE] knob.

LVL

(LEVEL)

 :

 The same operation as the 

[LEVEL] knob.

LO

(LOW)

 :

 The same operation as the 

[LOW] knob.

MID

(MIDDLE)

 :

 The same operation as the 

[MIDDLE] knob.

HI

(HIGH)

 :

 The same operation as the 

[HIGH] knob.

PRE

(BOOSTER PRE LEVEL)

 :

 Adjusts the 

BOOSTER PRE LEVEL parameter.

PST

(BOOSTER POST LEVEL)

 :

 Adjusts the  

BOOSTER POST LEVEL parameter.

EPN 

(EXPRESSION MIN) 

Specifies the variable range of the 

parameter controlled by EXPRESSION 

FUNCTION. The variable range differs 

depending on the parameter.

EPM 

(EXPRESSION MAX) 

Parameter

Explanation

SWP  

(ON/OFF SWITCH FUNCTION 

PREFERENCE) 

MEM

(MEM)

 :

 The setting in memory is used.

SYS

(SYS)

 :

 The controller’s function is fixed 

regardless of memory.

MEP  

(MEMORY SWITCH 

FUNCTION PREFERENCE) 

C1P  

(CTL1 FUNCTION 

PREFERENCE) 

C2P  

(CTL2 FUNCTION 

PREFERENCE) 

EPP  

(EXPRESSION FUNCTION 

PREFERENCE) 

ETF

(EXTENT FROM) 

Specify the memory switching range 

(MEMORY EXTENT FROM–TO).

MAN

(MANUAL)

, 

M-1

(MEMORY 1)

 –

M.27

(MEMORY 127)

ETT

(EXTENT TO) 

RCH  

(MIDI RECEIVE CHANNEL) 

Specifies the MIDI receive channel.
If this is “

oFF

,” MIDI messages are not 

received.

1

–

16

, 

oFF

TCH  

(MIDI TRANSMIT CHANNEL) 

Specifies the MIDI transmit channel.
If this is “

oFF

,” MIDI messages are not 

transmitted.
If this is RECEIVE, the same setting as the 

receive channel is used.

1

–

16

, 

RCv

(RECEIVE)

, 

oFF

MEMORY

MEMORY

MEMORY

MEMORY

MEMORY

MEMORY