34
Use MIDI Functionality
Here’s how to transmit a
bank select LSB (#CC32) message
on the
bank select MSB
and
program change message
you most recently transmitted (specified) as described in “Transmitting a bank select
MSB message” (p. 35) and “Transmitting a program change message” (p. 33) will also be transmitted.
fig.BANK-1
fig.utl
1.
Simultaneously hold the
[MIDI CH]
button and
[PGM CHANGE]
button
down.
The display will indicate “UTL,” and the A-500S enters UTILITY mode.
2.
Press
[BANK LSB]
key.
fig.BANK-3
3.
Use the
VALUE knob
or the
[0]
–
[9]
keys of the keyboard to specify the bank select LSB
that you want to transmit.
* The -- area displays the currently set value. If it has not been set, the default setting will be
displayed. Even if you change the type or mode of the MIDI message that is assigned, the
default setting will be displayed. This will be lit if the value is the same as the currently set
value, or will blink if the value is different.
fig.fig.enter
4.
Press the
[ENTER]
button.
* The setting will be cancelled if you press another button instead of the
[ENTER]
button.
The
bank select LSB message
has now been transmitted.
Transmitting a bank select LSB message
2
1
3
4
A-500S_e.book 34 ページ ２０１０年２月１９日 金曜日 午後８時３分
Summary of Contents for Cakewalk A-500S
