26
4 Adjustment
4
[ ],[ ],[ ] + POWER ON
Sensor
DRAM
EEROM
Ageing
Force
Key
Calib.
Landing
Checks whether DRAM is functioning properly.
Checks whether sensor is functioning properly.
SENSOR ON = 1, SENSOR OFF = 0
Checks whether EEROM is functioning properly.
This is for MOTOR BALANCE ADJUSTMENT. (page39)
This is for PEN PRESSURE ADJUSTMENT. (page33)
Push panel key in sequence of [MENU],[ENTER],
[ ],[ ],[ ],[ ],[SETUP],[TEST]key to check.
This is for calibration. (page41)
This is checking softlanding function. (page44)
[ ],[ ] key to select.
[ENTER] key to carry out.
[MENU ] key
[MENU ] key
[MENU ] key
[MENU ] key
[MENU ] key
[MENU ] key
[MENU ] key
[MENU ] key
vice mode
ver1.10
Displays EPROM version.
User initialize
NO YES
Data which has been set by the
user inside the EEROM will be
initialized. Turn on the power
while pressing the [ENTER] key.
Turn on the power while
pressing the [right] key.
LIMITED INITIALIZE
SERIAL INTERFACE CHECK
User parameter
initializing..
ENTER
RS232C check NG!
Error bit= 1111
RTS-DSR error
DTR-CTS error
TxD-RxD error
STxD-SRxD error
EEROM all init.
NO YES
All
data inside EEROM, including
Service Mode settings, will be
initialized. Turn on the power
while pressing [left], [right] and
[ENTER] keys.
ALL INITIALIZE
EEROM all init.
Initializing..
ENTER
4-2 Service Mode
Connection
2 (TxD)
3 (RxD)
4 (RTS)
6 (DSR)
5 (CTS)
20 (DTR)
14 (STxD)
16 (SRxD)
