29
4 Adjustment
4
5
6
Select “
ORIGIN SET
” menu by pushing the
[MENU]
key
3 times.
Move the PEN CARRIAGE to where the clearance between
the pen tip and the BED is the smallest among 5 positions (3
positions for PNC-1210 (Directed by arrows)) with the
[
]
,
[
]
keys.
WIDTH LENGTH
----- ------
MENU
ORIGIN SET->ENTER
0 0
Press the [MENU]
key three times.
Adjusting Screw
BED
PEN CARRIAGE
7
Make sure the clearance is 2.4 ~ 3.0 mm at other positions.
If not, proceed to Spacer Bed Adjustment. (Page 30)
Adjust the Adjusting Screw so that the clearance between
the pen tip and the BED would be 2.4 ~ 2.6 mm at all
positions.
