44
4 Adjustment
4
4-10 Softlanding Adjustment
Softlanding function is a system to land the pen
smoothly to prevent pen bouncing.
When the machine receives a command to move
the pen down, it puts the pressure downwards
and starts moving the pen DOWN. Then it puts
the pressure upward before putting the pen
pressure and lands the pen smoothly.
By using “
Landing
” in Service Mode, time
being taken to put the pressure downwards (ATK)
and upwards (BRK) can be adjusted.
[Pen Height]
[Time]
Bed
ATK
BRK
Pen Down Pressure
Pen Up Pressure
Pen Pressure
1
2
Set the vinyl sheet on the machine and put the Blade Holder
to the PEN CARRIAGE.
Check and make sure that the Tool Height and the Pen
Pressure are adjusted.
It is not necessary to adjust softlanding if Tool Height and
Pen Pressure are adjusted correctly.
This adjustment should be carried out when pen bouncing
problem occurs or timing of the pen down is delayed.
