73
4 Adjustment
4
2
3
4
5
Raise the SHEET LOADING LEVER and select the
PRINTING MODE.
Normally, it should be in the PRINTING MODE.
If not, selection can be done by pressing the [POWER] key.
PRINTING MODE : [POWER] LED ON.
ADJUSTMENT MODE : [POWER] LED BLINKS.
Set the MAGENTA RIBBON CARTRIDGE, MEDIA and
the PEN on the machine. The pattern shown in the figure
will be printed when SHEET LOADING LEVER is lowered
and FRONT COVER is closed.
Other RIBBON CARTRIDGE except the
MAGENTA can not be used.
250mm
50mm
CUT
Calculate the amount to be compensated by using the right
formula.
CA = Compensating amount
CL = Commanded amount (250 mm)
ML = Measured amount
FORMULA
CA =
CL - ML
ML
x 100
[FOR EXAMPLE] When ML is 249.9 mm
250 mm - 249.9 mm
249.9 mm
X 100 = 0.04 %
Turn on the MAIN POWER SW while pressing [POWER],
[SHEET TYPE] and [BASE POINT] keys and enter the
FACTORY MODE.
Select [CARTRIDGE HOLDER 3] with [
] or [
] keys
and press [SHEET TYPE] key to enter the GRIT
COMPENSATION MODE.
Summary of Contents for Color Camm Pro PC-60
Page 4: ... MEMO ...
Page 6: ...2 1 Structure Spare Parts 1 1 2 FRAME 1 ...
Page 8: ...4 1 Structure Spare Parts 1 1 3 FRAME 2 ...
Page 88: ...84 4 Adjustment 4 MEMO ...
