Roland DXY-1150A User Manual Download | Manualshive

Page: 45 / 45

background image

Please read this agreement carefully before opening the sealed

package or the sealed disk package

Roland License Agreement

Opening the sealed package or sealed disk package implies your acceptance of the terms and conditions of this
agreement. If you do NOT accept this agreement, retain the package UNOPENED. (This product is just one of
included items. Please be aware that any amount of the purchase price will not be refunded for return of this
product as a single item, regardless of whether the package is opened or unopened.) The enclosed Roland
product is a single user version.

Roland DG Corporation ("Roland") grants you a non-assignable and non-exclusive right to use the
COMPUTER PROGRAMS in this package ("Software") under this agreement with the following terms and
conditions.

1. Coming into Force

This agreement comes into force when you purchase and open the sealed
package or sealed disk package.
The effective date of this agreement is the date when you open the sealed
package or sealed disk package.

2. Property

Copyright and property of this Software, logo, name, manual and all
literature for this Software belong to Roland and its licenser.

The followings are prohibited :

(1) Unauthorized copying the Software or any of its support file, program

module or literature.

(2) Reverse engineering, disassembling, decompiling or any other attempt

to discover the source code of the Software.

3. Bounds of License

Roland does not grant you to sub-license, rent, assign or transfer the right
granted under this agreement nor the Software itself (including the
accompanying items) to any third party.
You may not provide use of the Software through time-sharing service
and/or network system to any third party who is not individually licensed
to use this Software.

You may use the Software by one person with using a single computer in
which the Software is installed.

4. Reproduction

You may make one copy of the Software only for back-up purpose. The
property of the copied Software belongs to Roland.
You may install the Software into the hard disk of a single computer.

5. Cancellation

Roland retains the right to terminate this agreement without notice
immediately when any of followings occurs :
(1) When you violate any article of this agreement.
(2) When you make any serious breach of faith regarding this agreement.

6. Limitations on Liability

Roland may change the specifications of this Software or its material without
notice.

Roland shall not be liable for any damage that may caused by the use of the
Software or by exercise of the right licensed by this agreement.

7. Governing Law

This agreement is governed by the laws of Japan, and the parties shall
submit to the exclusive jurisdiction of the Japanese Court.

R5-990216

«
...
43
44
45

Summary of Contents for DXY-1150A














































Reviews:

No comments

Related manuals for DXY-1150A

Brand: CalComp Pages: 4

Brand: ABB Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands