57
Use MIDI functionality
Bank mode (BANK)
This mode lets you transmit a bank select (MSB, LSB) message on the
current channel
. The
program change message you most recently transmitted (specified) in
Program Change mode
(p. 56) will also be transmitted following the bank select message.
fig.BANK2_90
fig.bank
1
Press the
[SHIFT]
button so it is lit.
2
Press the
[BANK SEL]
button.
The
[BANK SEL]
will light. The display will indicate the most recently
transmitted bank select (MSB) value.
* The
[HEX]
or
[DECIMAL]
button will also light according to the input mode (p. 54).
fig.BANK-2
3
First, specify the
bank select MSB
(CC#00).
Use the
[DEC] [INC]
buttons or the
[0]
–
[F]
keys of the keyboard to specify the
bank select MSB that you want to transmit.
4
Press the
[ENTER]
button.
The setting will be cancelled if you press another button instead of the
[ENTER]
button.
fig.BANK-3
5
Next, specify the bank select LSB (CC#32).
The display will indicate the most recently transmitted bank select (LSB) value.
Use the
[DEC] [INC]
buttons or the
[0]
–
[F]
keys of the keyboard to specify the
bank select LSB that you want to transmit.
6
Press the
[ENTER]
button.
The bank select has now been transmitted.
The setting will be cancelled if you press another button instead of the
[ENTER]
button.
2,4
1
3,5
*1 Reference
*1 Reference
*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode
of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,
or will blink if the value is different.
PCR-1_e1.book 57 ページ ２００３年１１月２０日 木曜日 午後３時２２分
Summary of Contents for Edirol PCR-1
Page 98: ...98 MEMO PCR 1_e1 book 98...
