91
Use MIDI functionality
Transmit mode
fig.edt2
1
Press the
[EDIT]
button.
The display will indicate “EDT”.
2
Press the
[BULK]
key.
fig.blt
3
Press the
[1]
key.
The display will blink “BLT” (Bulk Transmit).
fig.ts
4
Confirm what’s indicated and press the
[ENTER]
button.
The display will indicate “TS”, and the “S” will blink.
5
Use the
[DEC]
[INC]
buttons or the
[0]
[1]
keys to select the mode.
6
Confirm what’s indicated and press the
[ENTER]
button.
fig.ts-1
7
The third digit of the display will blink, and the PCR-1 will wait to transmit
bulk data.
8
Press the
[ENTER]
button.
On your sequencer software, specify “PCR -1 2” as the MIDI input device. For details on this
setting, refer to the manual of your sequencer software.
For details on the port that will be used to transfer bulk data, refer to
fig.end
9
When the PCR finishes receiving the bulk data, the display will indicate “END”.
10
Confirm what’s indicated and press the
[ENTER]
button.
0
SINGLE BULK
The currently recalled memory (the current memory) will
be transmitted as bulk data
1
ALL BULK
All memories (memories 1–F) will be transmitted as bulk
data.
PCR-1_e1.book 91 ページ ２００３年１１月２０日 木曜日 午後３時２２分
Summary of Contents for Edirol PCR-1
Page 98: ...98 MEMO PCR 1_e1 book 98...
