46
Use audio functionality
Playing sounds on your computer
Here’s how you can listen to audio playback from your computer from the PCR-1 or
headphones connected to the PCR-1. Play back audio data (e.g., .WAV data).
fig.connect-play
* You will no longer hear sound from the internal speaker of your computer.
* The PCR-1 is not equipped with its own MIDI sound generator. This means that MIDI data from your
computer cannot be played by the PCR-1.
* If the sampling frequency is set to 96 kHz REC, you will not hear the playback sound from your
application .(
➝
USB AUDIO MODE SETTING
* Some connection cables contain a resistor. Do not use a cable with a built-in resistor to connect with the
PCR-1. Doing so may make the sound extremely weak, or inaudible. Use the cable without a built-in
resistor (eg.,Roland PCS series).
To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power on all devices before making any connections.
In order to play sounds on your computer from the PCR-1, you will need to first install the
driver and make device settings. (
➝
Windows
Macintosh
You must also turn on the PCR-1’s USB Audio functionality. (
➝
USB AUDIO ON/OFF
USB cable
OUTPUT
Signal flow
Headphones
Audio cable
External input jacks
(AUX IN, LINE IN)
Stereo set,
Monitor speakers, etc.
PCR-1_e1.book 46 ページ ２００３年１１月２０日 木曜日 午後３時２２分
Summary of Contents for Edirol PCR-1
Page 98: ...98 MEMO PCR 1_e1 book 98...
