61
Use MIDI functionality
Assign MIDI messages (EDIT)
You can assign the following functions to a controller.
You will use Edit mode to assign MIDI messages.
* If you want to assign a single-byte system message (system realtime message, tune request) or a freely
specified message of up to 24 bytes, refer to
Edit mode ( EDIT )
fig.EDIT2_90
NOTE
You can copy assigned messages to
another controller, or cancel an as-
signment. For details, refer to
ing a MIDI message assignment
(ASSIGN COPY)
ing a MIDI message assignment
(NO ASSIGN)
AFTERTOUCH
CONTROL CHANGE
PROGRAM CHANGE
RPN
NRPN
Sys Ex
TEMPO (20-250)
1
How Basic mode and Advanced mode differ
The assignment s
“NOTE“
,
“AFTERTOUCH“
,
“CONTROL CHANGE“
,
“PROGRAM
CHANGE“
,
“RPN“
,
“NRPN“
,
“Sys Ex.“
can be made either in Basic mode or Advanced mode.
Use the mode that is appropriate for your purpose.
• Basic mode
:You can make assignments easily, with the minimum number of steps.
• Advanced mode :A greater number of steps are required, but you can specify more
parameters and make more sophisticated assignments.
* For these assignments, the rightmost digit (third place) in the display is a number that indicates the mode
(Basic mode or Advanced mode).
PCR-1_e1.book 61 ページ ２００３年１１月２０日 木曜日 午後３時２２分
Summary of Contents for Edirol PCR-1
Page 98: ...98 MEMO PCR 1_e1 book 98...
